Tube and Profile End Processing

GARBOLI RANGE

Extremities

Garboli Range includes dedicated machines for deburring, abrasive grinding or finishing, and notching of tube and profile ends. Deburring removes burrs left by cutting or machining; grinding and finishing treat shaped end surfaces; notching forms the mating profile needed for a joint. These are separate operations performed by dedicated configurations. Section, wall thickness, cut angle and joint geometry help determine the appropriate end-working machine.

ROTOR 200 WET — End deburring machine ROTOR 200 WET
Min/max dimensions of square parts: 10 / 148 mm.
Min/max dimensions of round parts: 10 / 210 mm
LE — Tube end grinding machine Grinding machines LE Belt finishing machine
Diameter min. / max.: D = 10-50 mm (2" max)
Abrasive belt dimensions: S = 1200 mm | L = 80 mm
NOK 150 — Pipe notching machine Notching machines NOK 150 Notching and belt grinding machine
Abrasive belt dimensions: S = 2000 mm | L = 150 mm
Diameter min. / max.: D = 20-150 mm (6" max)

Cut edges, shaped ends and joint profiles

The condition of a cut end guides the operation. A burr calls for removal or edge treatment, while an assembly may require a shaped notch. A shaped end that requires abrasive preparation or a specified texture uses a dedicated grinding or finishing configuration. The general tube and profile end section covers the wider portfolio; Garboli Range deburring machines explain the burr-removal process within this line.

The external surface of a tube has a different working area from its end. The Range machines for round and oval tubes or bars cover the longer surface treatment. For more information about end-working machines suited to your tubes or profiles, contact the Garboli team.

Frequently asked questions

Custom-made solutions for every productive need

We design tailor-made machines to meet your processes, production volumes, and specific machining requirements.

garboli company