Straight and conical machines
Garboli Range equipment for straight and conical workpiece applications serves distinct functions: end deburring and workpiece feeding or holding. The required operation determines which equipment is relevant. End treatment and workpiece handling are separate from abrasive finishing along a tapered surface.
ROTOR 200 WET
ROTOR 200 WET
APM LOADER
Grinding machines
APM LOADER
Front feed and holding table
APN LOADER
Grinding machines
APN LOADER
Front APN feed system
Separate the operation from the workpiece shape
A conical workpiece has a diameter that changes progressively along its axis and may still have a straight axis. End treatment concerns its cut end; feeding and holding concern its movement and positioning. Compatibility with the diameter variation, length and end geometry must be checked for the selected configuration.
Choosing end-working or surface-treatment equipment
For burr removal at a cut end, explore Garboli Range tube and profile end machines. For grinding or finishing along the length, use the general straight and conical workpiece section to identify the appropriate application. Surface treatment and handling can belong to the same manufacturing route, but they remain separate functions. For abrasive treatment of tapered surfaces, explore Performance straight and conical workpiece applications.
The Range application for straight round and oval tubes and bars covers constant-section workpieces. Share the component drawing and required operation with Garboli to establish the suitable equipment.
Frequently asked questions
No. A tapered component can have a straight axis while its diameter changes along its length.
No. End-deburring, feeding and holding units have different functions. Full-length abrasive treatment requires a suitable surface-processing configuration.
Provide the workpiece geometry and dimensions and identify the operation: feeding, holding, end deburring or surface treatment. Compatibility must be assessed for that task.

