Garboli machines for tube and profile ends remove cutting burrs or form an end profile for a joint. Brush deburring treats the cut perimeter; abrasive-belt notching shapes the mating geometry. Dedicated abrasive configurations also grind and finish shaped tube and profile ends. These operations have different purposes and require suitable configurations. Section, wall thickness, cut angle and the following assembly or manufacturing step determine the required end condition.
All the Machines that work with extremities
ROTOR 200
Deburring machines
ROTOR 200
Orbital brush deburring machine
ROTOR 200 WET
ROTOR 200 WET
LE
Grinding machines
LE
Belt finishing machine
NOK 150
Notching machines
NOK 150
Notching and belt grinding machine
Deburring and edge treatment after cutting
A cut tube or profile can carry a burr or an uneven edge. Deburring removes the residual material; further edge treatment can prepare the end for handling or the next manufacturing step. Garboli deburring machines cover the process across more than one workpiece geometry. The Garboli Range tube and profile end machines focus on the corresponding line application.
The external tube surface may need a separate finish from the end. Garboli machines for metal tubes cover grinding, satin finishing and polishing along the component, while this page addresses the defined end region.
Grinding and finishing shaped ends
Selected Garboli abrasive configurations grind or finish shaped tube and profile ends. They treat the defined end surface, with abrasive contact and workpiece support matched to its geometry and the specified result. This operation addresses the surface condition of the end for subsequent fabrication or assembly.
Notching for joints and assemblies
Notching shapes a tube or profile end so that it meets another part at the intended connection. Abrasive-belt contact and stable clamping form the profile of the joint. The broader family of metal notching machines explains this operation and its relation to other shaped components. In repeated production, stable positioning helps maintain the same end geometry from one piece to the next.
For details about Garboli machines for your tube or profile ends, contact the Garboli team.
Frequently asked questions
It removes residual burrs from the cut perimeter after cutting or machining, according to the required edge condition.
A notch is used when the component needs a mating profile for a joint. It has a different purpose from burr removal.
Not automatically. The external length and cut perimeter are different working areas and require suitable equipment for their respective results.
