LT 130/S
 
Orbital grinding line consisting of TWO PROCESSING UNITS: the first head is for grinding, while second head is for the finishing of STRAIGHT parts with round, oval, elliptical or irregular section made of stainless steel, iron, aluminium, brass and other metals.
The line is supplied ready to work with following STANDARD EQUIPMENT: powered and SELFCENTERING front/back feed (it is possible to work taper parts), feed speed adjustable with “inverter” equipment complete of digital display for direct reading, AN/A equipment for the automatic opening of abrasive belts with photocell system, separate controls board, supplementary emergency devices, motors voltage 400V/50Hz, n°8 abrasive belts of different grits, service keys, instructions book and CE conformity declaration.
   
Equipment on request
 
 
 
Round and oval pipes grinding: simultaneous rotating of disc A and abrasive belts B.
 
Flat parts grinding, max. 20 mm. width (on request): disc A locked and abrasive belts B running.
 
 
 
             
 
 
 
D=10/130 mm.
L=650/6000 mm.
S=2000 mm.
L=120 mm.
2 kw.x2  7 kw.x2  0,33 kw.x2
V=1/10 mt./min
730 Kg.
H=163 cm.
P=128 cm.
L=141 cm.
 
 
 
     
 
 
   
Loader for straight pieces length 1500-6000 mm. with round section   “Step by step” Loader/Unloader for straight pieces length 1500-6000 mm. with round, oval and elliptical section.   Adjustable grinding belts speed with inverter equipment.
 
 
 
     
 
LT 130/S  | See further machines for STRAIGHT PARTS
  LT 80 | LT 130 | LT 80/S | TRIS | DUO | SPECIAL APPLICATIONS
 
     
 
 
Home  |  Company  |  Catalogue  |  Company Location  |  Info Request  |  Technical Assistance  |  Download   |  News
 
 
Copyright © 2007 GARBOLI S.r.l., All Rights Reserved | Credits
  
LPC 160 LT 80 LT 110 LT 80 S LT 110 S TRIS DUO APPLICAZIONI SPECIALI GPS 3 GO APPLICAZIONI SPECIALI NOK 75 NOK 120 SET LE APPLICAZIONI SPECIALI