MIRROR

mirror Info enquiry form
 
“CN” operated machine suitable for grinding and “MIRROR” polishing on sheets and, with proper equipment, plates with square or rectangular section and tubes with round and oval section.

Machine structure is very sturdy with a working table on which are fixed the workpieces, together with pre-arrangements for further equipment.
There is also a brush-holder sliding on tempered-steel guides and allowing three different movements:
- Translation, with alternating movement up to 3 mt. length;
- Vertical, from 1 to 500 mm.;
- Oscillating of the brush, in order to cross the cut.
   
Equipment on request
 
             
 
 
 
technical features
L=10/150mm - H=1/100mm - P=160/6000mm
D=10/80mm - L=20/2000mm
S=2000mm - L=150mm
V=1/10 mt/min
3,0 kw - 0,09 kw
L=300 mm.
H=500 mm.
P=3000 mm.
D=max 300 mm.
L=350 mm.
D=400 mm.
L= 350 mm.
7,5 kW
L=max 300x300 mm.
P=max 3000 mm.
 
 
 
   
  example of workable items  
  metallic surfaces worked on Mirror machine  
 
 
standard equipment
Lucidatura elementi tondi (3 mandrini)   Lucidatura elementi quadrati con rotazione automatica per lavorazione sui 4 lati   Lucidatura superfici piane
round tube polishing (3 spindles)   square pipe polishing with automatic rotation for processing on the 4 sides   flat surfaces polishing
       
 
 
 
     
 
MIRROR  | View other flat surfaces machines - Garboli deburring machines
  GPS BELT | GPS BRUSH | GPS MODULO | GO | SYRIO
 
     
Copyright © 2009-2015 Brusa & Garboli Srl. - All Rights Reserved | Credits