LT 130/S

Info enquiry form
 
Orbital grinding line consisting of TWO PROCESSING UNITS: the first head is for grinding, while second head is for the finishing of STRAIGHT parts with round, oval, elliptical or irregular section made of stainless steel, iron, aluminium, brass and other metals.
The grinding line is supplied ready to work with following STANDARD EQUIPMENT: powered and SELFCENTERING front/back feed (it is possible to work taper parts), feed speed adjustable with “inverter” equipment complete of digital display for direct reading, AN/A equipment for the automatic opening of abrasive belts with photocell system, separate controls board, supplementary emergency devices, motors voltage 400V/50Hz, n°8 abrasive belts of different grits, service keys, instructions book and CE conformity declaration.
   
Equipment on request
 
 
 
Round and oval pipes grinding: simultaneous rotating of disc A and abrasive belts B.
pic. 1
 
Flat parts grinding, max. 20 mm. width (on request): disc A locked and abrasive belts B running.
pic. 2
 
 
 
             
 
 
 
tecnical features
L=30/130 mm - L=670/6000 mm
S=2000 mm - L=120 mm
2 kw.x2 - 5,5 kw.x2 - 0,5 kw.x2
V=1/15 mt/min
1620 kg
160x380x200
Standard
D=30/130 mm.
L=670/6000 mm.

Special
D=10/130 mm.
L=420/6000 mm.
S=2000 mm.
L=120 mm.
2 kw.x2  5,5 kw.x2  0,5 kw.x2
V=1/15 mt/min
1620 Kg
H=160 cm.
P=380 cm.
L=200 cm.
 
 
 
     
 
 
equipment on request
LOADER and UNLOADER for straight pipes Loader for straight pieces,
Loader for straight pieces, length 1500-6000 mm., with round section.

Loader/Unloader “step by step” for straight pieces length 1500-6000 mm., with round, oval and elliptical section.
Example of line model LT130/S with LOADER and UNLOADER
for straight pipes with round and oval section max. 6000 mm. length
  Loader/Unloader “step by step” for straight pieces length 1500-6000 mm., with round, oval and elliptical section.

        Abrasive belts speed adjustable
    Abrasive belts speed adjustable (10-30 mt./sec.) with increased power special inverter (11 Kw.) and digital display with mt/sec real values.
 
 
 
     
 
LT 130/S  | View other machines for straight parts - Garboli polishing machines
  TRIS | LT 130 | LT 130-W | LT 200 | LT 200-W | LT 130-W/S | LT 200/S | LT 200-W/S | DUO
 
     
Copyright © 2009-2015 Brusa & Garboli Srl. - All Rights Reserved | Credits