Info enquiry form  

LT 130

Orbital grinding machine using abrasive belts for high volume requirements, for grinding, buffing and satin finishing of STRAIGHT LENGTHS of stainless steel, brass, iron, aluminium or any other metal having round, oval, ellyptical or irregular section.
Machine is equipped with a SELF-CENTERING feed that enables processing of taper and shaped parts.
Further STANDARD EQUIPMENT supplied with the grinding machine are: feed speed adjustable with “inverter” equipment complete of digital display for direct reading, motors voltage 400V/50Hz, n°4 abrasive belts in different grits, service keys, instructions book and CE conformity declaration.
   
Examples of workable items
Equipment on request
 
 
 
Round and oval pipes grinding: simultaneous rotating of disc A and abrasive belts B.
pic. 1
 
Flat parts grinding, max. 20 mm. width (on request): disc A locked and abrasive belts B running.
pic. 2
 
 
 
             
 
 
 
tecnical features
d=30/130 mm - l=670/6000 mm
s=2000 mm - l=120 mm
2,0 kw - 5,5 kw - 0,5 kw
v=1/15 mt/min
710 kg
150x136x110
Standard
D=30/130 mm.
L=670/6000 mm.

Special
D=10/130 mm.
L=420/6000 mm.
S=2000 mm.
L=120 mm.
   2,0 kw.  5,5 kw.  0,5 kw.
V=1/15 mt/min
710 Kg.
H=150 cm
P=136 cm
L=110 cm
 
 
 
   
  example of workable items  
  workable straight tubes  
 
 
Powered back feed unit.   Adjustable Sanding belts speed with inverter. (10-30mt./sec.).   Adjustable Sanding belts speed with inverter. (10-30mt./sec.).
Powered back feed unit.   Adjustable Sanding belts speed with inverter. (10-30mt./sec.).   Adjustable Sanding belts speed with inverter. (10-30mt./sec.).
         
 Loader for straight pieces, length 1500-6000 mm., with round section.
Loader for straight pieces, length 1500-6000 mm., with round section.
   Loader/Unloader “step by step” for straight pieces length 1500-6000 mm., with round, oval and elliptical section.
Loader/Unloader “step by step” for straight pieces length 1500-6000 mm., with round, oval and elliptical section.
   Abrasive belts opening scheme  with AN and AN/A equipment.
Abrasive belts opening scheme
with AN and AN/A equipment.
 
 
 
     
 
LT 130  | View other machines for straight parts - Garboli polishing machines
  TRIS | LT 130-W | LT 200 | LT 200-W | LT 130/S | LT 130-W/S | LT 200/S | LT 200-W/S | DUO
 
     
Copyright © 2009-2015 Brusa & Garboli Srl. - All Rights Reserved | Credits